Bảo Trì Khí Nén, Tủ Điện & Camera Yên Phong (Demo)
KCN Yên Phong I, Bắc Ninh
Across VSIP Bac Ninh, Yen Phong & Que Vo (VSIP Bac Ninh, Yen Phong I-II, Que Vo 1-3, Dai Dong Hoan Son), labor for 15-75HP screw air compressor servicing runs 1,180,000-2,740,000 VND/unit, and 3-phase MCCB trip diagnostics cost 780,000-2,160,000 VND. Standard dispatch ETA is 40-75 minutes.
| Service Item | Specification | Fair Benchmark (VND) | Anti-Overcharge Checkpoint |
|---|---|---|---|
| Screw Air Compressor 2,000h PM Service Labor | 15HP - 75HP | 1,180,000 - 2,740,000 / unit (labor) | Verify airend temp <95°C, separator dP <0.8 bar, drain receiver condensate |
| 3-Phase Panel Load Balancing & MCCB Trip Fix | 100A - 800A | 780,000 - 2,160,000 / panel | Keep phase imbalance <15%, re-torque copper busbars, verify insulation >=1 MΩ |
| Electrical Cabinet IR Thermography Audit | 10 - 25 tủ/lượt | 2,450,000 - 4,700,000 / audit | Deliver thermal image report flagging connections with ΔT >15°C rise |
| Compressor Over-Temp / Solenoid Valve Fault Repair | Atlas / Kobelco / Hitachi | 880,000 - 2,550,000 / call | Test load/unload cycling at 7-8 bar for 20 minutes before sign-off |
Chào anh/chị, nhà máy bên mình tại VSIP Bắc Ninh, Yên Phong I-II, Quế Võ 1-3, Đại Đồng Hoàn Sơn (KCN VSIP Bắc Ninh - Yên Phong - Quế Võ) đang gặp sự cố điện nhà xưởng / máy nén khí trục vít (công suất: ... HP/A, tình trạng: ...). Nhờ bên mình báo giá kiểm tra (xuất VAT) và cho kỹ thuật qua xử lý gấp giúp nhé.
Compressor rooms in VSIP Bac Ninh, Yen Phong I-II, Que Vo 1-3, Dai Dong Hoan Son frequently exceed 40°C, degrading oil within 1,500-2,000 hours and causing >105°C high-temp shutdowns. On 100A-800A main switchboards, phase imbalance above 15% or loose copper busbar lugs commonly trigger nuisance tripping during peak shift startups.
First, insist on IR ΔT and 3-phase clamp measurements before approving full 400A MCCB swaps (re-torquing lugs costs 3-5x less). Second, retain spent oil/air separators and run a 20-minute 7-8 bar load/unload cycle test. Third, record Megger insulation >=1 MΩ on motor feeder runs.
Spot loose lugs and hot breakers weekly before arc faults occur
Supply verified ISO VG 46 oil yourself to avoid overpriced substitute fluids
No contractors match this language filter in the zone
Showing nearest Vietnamese contractors below — use the copyable Zalo script above:
KCN Yên Phong I, Bắc Ninh
24/7 industrial teams near VSIP Bac Ninh, Yen Phong I-II, Que Vo 1-3, Dai Dong Hoan Son average 40-75 minutes during daytime shifts and 60-90 minutes overnight.
Replace mineral oil every 2,000 hours or synthetic ISO VG 46 oil every 3,000-4,000 hours, and blow out radiator fins monthly in dusty plant rooms.
Loose cable lugs create localized heat that trips the breaker thermal element prematurely. An IR camera finds hot joints in seconds.
Yes. Buying verified ISO VG 46 oil yourself and paying 1.2M-2.8M VND labor prevents counterfeit lubricant markups.
Contracts covering Tỉnh Bắc Ninh (TP. Từ Sơn, Yên Phong, Quế Võ) map to Tỉnh Bắc Ninh mở rộng (hệ thống 2 cấp Tỉnh -> Phường/Xã); share your updated enterprise tax ID so contractors issue valid VAT e-invoices.